- Home
- ACCESSORIES
- RunCam TX200U
- Home
- ACCESSORIES
- For RunCam Micro Swift
- RunCam TX200U
- Home
- ACCESSORIES
- For RunCam Micro Sparrow
- RunCam TX200U
Get a $5 cash coupon by joinning our Facebook group.
Product Description


Channel | CH1 | CH2 | CH3 | CH4 | CH5 | CH6 | CH7 | CH8 |
1 Band A | 5865 | 5845 | 5825 | 5805 | 5785 | 5765 | 5745 | 5725 |
2 Band B | 5733 | 5752 | 5771 | 5790 | 5809 | 5828 | 5847 | 5866 |
3 Band E | 5705 | 5685 | 5665 | 5645 | 5885 | 5905 | 5925 | 5945 |
4 Airwave | 5740 | 5760 | 5780 | 5800 | 5820 | 5840 | 5860 | 5880 |
5 Race Band | 5658 | 5695 | 5732 | 5769 | 5806 | 5843 | 5880 | 5917 |
6 Low Race | 5362 | 5399 | 5436 | 5473 | 5510 | 5547 | 5584 | 5621 |
Parameter
Model | RunCam TX200U |
Frequency Channel | 5.8G 48CH |
Output Power | 25mW / 200mW |
Working Current | 5V@150~400mA |
Voltage out | 5V@max 250mA |
Voltage in | 1S 3.5-5.5V |
Video Input Impedance | 75 Ohm |
Antenna | U.FL 5.8G 2dB Omni antenna |
Weight | 2.5g (with antenna) |
PCB Size | 19mm*19mm |
Product Reviews
-
best VTX for the buck!
Posted by Rudi on 25th Jun 2020
The TX200U is my favourite "budget" VTX! It might be inexpensive, but it outperforms any other 200mW VTXs that I have used. I now use it in all my micro builds.
-
Great 200mw vTx
Posted by Unknown on 2nd Jan 2020
works great and is small and light.
-
SetByFreqInMHz works but only for values in table
Posted by etheli on 5th Jul 2019
Setup via IRC/Tramp protocol works, including setting frequency as a MHz value, but only MHz values in the table may be set. For instance, setting to a value like 5777MHz should be supported (like it is in the original Tramp and Unify VTXs), but this unit rejects all MHz values not matching those in the frequency table.
-
Perfect mounting and remote chanel control
Posted by Unknown on 30th Jun 2019
I like mounting with the screws. Betwen the srews is is still place for RX. Ro WT and RX stays on the top deck together with proper mounted antenas.
The recption is wery good on a first test. Prewiously I use the simular shape VTK form AKK and recprion was terible.
The IRC trump chanel conroll alowes you to change the chanel eawen VTX is deep inside the Quad and you can not acces the botton or see the leds. -
Excellent reception and clarity from such a small VTX
Posted by Ek-trician on 17th Nov 2018
I’m impressed with the quality and clarity of this tiny VTX. It’s range at 200mah is as good (or better) as any 200 this small;1g! I changed the antenna to a long di-pole, adds better reception in odd angles etc. It screws right on the back of any RunCam Micro Camera. I’m using it with the RunCam Micro Sparrow in a Torrent 110 mini quad. Way better FPV!!! Good job as always RunCam!
-
Excellent reception and clarity from such a small VTX
Posted by Ek-trician on 17th Nov 2018
I’m impressed with the quality and clarity of this tiny VTX. It’s range at 200mah is as good (or better) as any 200 this small;1g! I changed the antenna to a long di-pole, adds better reception in odd angles etc. It screws right on the back of any RunCam Micro Camera. I’m using it with the RunCam Micro Sparrow in a Torrent 110 mini quad. Way better FPV!!! Good job as always RunCam!
-
Needs Audio
Posted by Rohan Sully on 20th Sep 2018
Great size and function.
Would be ace if it had audio as well.
Please create another version with high mW and audio. That would be nice to have. -
TX200U
Posted by Andy on 22nd Jul 2018
Real quality product from build, performance and the packageing supplied. If you are after a small and lightweight Tx then this will probably fit the bill. My only wish was that its voltage spread could be bigger, otherwise 5 stars.
-
great job
Posted by Ron Ponce on 5th Feb 2018
Used this transmitter with the Swift2. Had a great signal output, nice clear picture sent to a monitor for our robotic competition. Only thing i wish is it had a 9 volt connector to make it easier. Had to create my own
-
Micro sized ease.
Posted by Dan on 20th Jan 2018
A great companion to any micro sized fpv camera. Only downside is not having "smart audio" but not a deal breaker.
-
runcam TX200 transmitter
Posted by Andy crashpilot on 6th Jan 2018
Very nice and small to fit in most models light weight and connects to runcam sparrow real easy. I am using it on a new quad build and using a 1s lipo and have got 15mins of viewing time on one cell lipo so far. On 25mw not tried higher rates yet but for the price the quality is good but I would of liked a more a secure connection on antenna. It would be nice if they can make one for the nano too however very happy with my purchase thank you.
-
Simple and good
Posted by Unknown on 31st Dec 2017
Quick and easy setup, compact size.