1080p/60fps HD recording and WDR FPV Cam
Extremely Light Weight
Low Latency
Real-time audio output
It can save the recorded file if the camera loses power.
Modular design
Live preview
Video playback
Camera parameters setting
Firmware Upgrade
FOV Angle of Field | FPV FOV 130° / Recording FOV 165° |
Video Resolution | 1080@60fps / 1080@30fps / 720@60fps |
Video Files | MOV |
Image Resolution | 2 Megapixels |
TV Output | NTSC (720*480) / PAL (720*576) Switchable |
Real-Time Audio Output | Yes |
Interface | Micro USB / UART |
Max Micro SD Card Supported | 64G(need Class 6 or above, recommend Class 10/UHS-I/UHS-II) |
WiFi Module | Support (Removable) |
Dimensions | PCB 36*38mm / Lens Module 22*20mm |
Power Input | DC 5V |
Working Current | 650mA @5V |
Weight | 21g |
Package
Showing reviews 1-20 of 42 | Next
Posted by Matt B on 16th Oct 2017
This would've gotten 5 stars if the first unit wasn't defective. Runcam replaced the main board and its been fantastic ever since.
It's more susceptible to jello than most fpv camera's but soft mounting the camera and motors does the trick. This won't replace your gopro session but it's perfect for getting Hd footage out of light fast frames.
Overall this camera is an amazing innovation pushing this hobby in the right direction. Buy this camera!!
Posted by sunny liu on 12th Oct 2017
Good camera light weight, my 5inch is only 330g with 4s 1300mah battery strapped on. WDR working well, the color is sharp. I also own swift2 and i cannot feel the latency difference between them. Only down side is the wifi module, because my frame is blocking the module, i cannot plug it in, i urge runcam to make an extension cable and put it up for sale!
Posted by Unknown on 29th Sep 2017
excelente producto gracias por su servicio...
Posted by Copper on 28th Sep 2017
This is the only camera that will allow you to do HD in light 250g or less builds. This is now important due to regulations in many countries.
I have had some challenges feeding it 5V. You may need an additional BEC in your build. I would recommend to use a separate ESCs or something like the Asgard to avoid too many levels in your stack, depending on your frame.
The camera performs really well on stock settings for FPV. It has great low light performance. It may be even better in low light if you tune it (I have not). It is CMOS, but I get no jello effects.
The HD recordings are amazing. If you upload to youtube though, be prepared for some crap compression. There may be a way to improve this, but I am not aware of any at the moment.
All in all, I can only recommend this camera for micros with 3 or 4 inch propellers. Additionally, RunCam support is the best in the camera business, as far as my experience goes.
RunCam: now make a Split Micro for 2" inch, sub 120g builds and conquer the FPV world! :)
Posted by Joe on 23rd Sep 2017
The quality of the FPV function is great. The ability to record at higher than FPV quality (for a few extra grams) is what I like most of this product.
Posted by Antti on 21st Sep 2017
I like the camera a lot but there will be always problem with the ribbon cables like mine the longer cable make vertical lines to the picture. Runcam promise to send new long ribbon cable to me if i order more stuff. Also wifi module should be intergrated to the pcb so no need extra space. Other functions i don't have any bad comment and i like the camera and with this price is great! I can recommend this camera to everybody.
Posted by Nick Wood on 15th Sep 2017
Best Camera I have! I was hoping to be able to acquire the Runcam3 but was unable. I saw this and read some reviews and decided to give it a shot for my new FPV platform. The Picture quality is top notch with very low latency. I like that I know it is recording, by the visual indication on the screen. FOV is well above par. Would Highly recommend this to others.
Posted by julio cesar paz alfonso on 14th Sep 2017
excelente la recomiendo
Posted by Rusty (BIggenBFPV) Folsom on 1st Sep 2017
I was on the fence on this cameras still. I really love it now that its up and running. Love being able to plug it straight in and manage the files, id sugg maybe better way for the wifi module and the only big issue was that their was not an integrated OSD. You can run one off the board but i feel its a little laggy at times. Other than that this is a great camera!!!!
Posted by neil on 21st Aug 2017
Got the camera very fast. So far I amreally happy and footage looks great.
I uncliped the SD card holder by accident when I removed the SD card and then forgot to close the clip. I bent it flat against the board while closing the top of my drone. Got it back in place and all is well (so far). I love this camera.
Posted by jason on 15th Aug 2017
I bought 2 of these. I immediately installed the first one in a GepRC Leopard and tested it that weekend- it performed great and the HD recording is very nice. The mount is very easy to use and it hooked up easily. I've heard debate about latency but I don't fly fast enough to notice.
When I opened the second one, I found that the ribbon from the camera was not connected to the board. I could not get the connection bracket to unlock so I could reconnect it. I am going to try some rubbing alcohol to remove the coating (don't know if that is what is keeping it from unlocking). That is the only issue I have with my experience.
Posted by hazyhaze420fpv on 12th Aug 2017
I am amazed how easy it works. Easy setup and easy to use. The camera is the best cmos camera in the world. I will order some more
Posted by Tom on 11th Aug 2017
I thoroughly enjoyed my runcam split even though it only lasted me about a month. My first decent crash in the grass somehow messed up the ribbon connector so I replaced it with the extra long one included with the camera. Then, my first crash into a tree a stick jabbed the board and broke the three pin micro connector. Also the SD card started losing its connection almost immediately and I had to Jam a small piece of foam in to apply downward pressure on top of the card. Even with these faults I still think it's an awesome product just for the fact that you can get great HD footage in a 3 or 4 in build now without adding too much weight to your rig. I would buy another one for sure but I would definitely put it inside a quad with a canopy or carbon fiber side plates so as to protect the board.
Posted by James Sanchez on 10th Aug 2017
This product marks the turning point for the fpv community. Brilliant idea, brilliant product but it can still use some modifications.
Hey RunCam, change the wifi module (odd setup), change the sd card slot (card can come loose in a crash), add different camera shell colors for customization, reinforce the ribbon cable wire (feels flimsy).
Posted by Jeremy on 9th Aug 2017
The Runcam Split is great. It is so nice to have HD video without mounting a Gopro and have FPV video that's super solid.
FPV: The colors are great, the WDR makes shadows not pitch black and light not washed out, and the latency is nearly unnoticeable. The picture is clear and the field of view is perfect.
HD: This rivals Gopro footage. The field of view isn't as nice as superview but the colors are better, and the 1080p60 footage is super smooth and clean.
One caveat with this camera is it has an AWFUL mic. Don't plan on using it, but who cares about the audio on a drone video, you're going to put in music anyway.
Another caveat is that the circuit board is very fragile and not shielded with any kind of shrink, so you might want to put electrical tape on both sides so it doesn't get shorted with anything else in your stack.
I highly recommend this camera. Even on builds that do allow for a dedicated HD camera, the weight savings the Split offers make this the ultimate choice for basically every build.
Posted by Leon Vuksic on 6th Aug 2017
This is the best FPV camera I ever had on my racing quad, the quality of video is amazing! If someone would ask me what to buy, I would instantly say Runcam Split!!!
Posted by Charles on 5th Aug 2017
Product never arrived.
Posted by Pietro Cossu on 4th Aug 2017
Molto versatile, si adatta con facilità a qualsiasi progetto, disponibili un infinità di acessori e ricambi, rapporto qualità/prezzo imbattibile. Per progetti FPV ottima per peso, qualità immagine e consumo batteria. Per altri progetti, esempio telecamera on board su macchina unico problema scalda un po. Estremamente soddisfatto dell'acquisto.
Posted by ArchiCopters on 1st Aug 2017
Es el resultado de una evolucíon lógica de las cámaras del hobby, se acabó la redundancia de cámaras!
Tiene sus puntos malos, como son el sistema de intarcambio de tarjetas SD, la excesiva distorsion de lentes o el micrófono... pero gana lo bueno a lo malo. Un gran avance para disminuir peso en nuestros multis y muy cómo da de utilizar.
Puedes ver la review completa aquí:
https://youtu.be/i-uyzCpqJUE
Posted by Unknown on 31st Jul 2017
This is a perfect camera for what is built for.
Showing reviews 1-20 of 42 | Next