Additional Information

Site Information

  Loading... Please wait...
  • USD

    Currency Converter

  • Image 1
  • Image 2
  • Image 3
  • Image 4

RunCam Hybrid

US$99.99 US$89.99
(You save US$10.00)
Free shipping
Out of stock

Out of Stock

Product Description

RunCam Hybrid
True 145° Wide Angle 4K HD & FPV Camera
HD FOV 145° Racing Level FPV Latency Single Board Design
RunCam Hybrid
FOV 145° HD recording.
Customized high-quality 7 layers of glass lens +
SONY sensor, wider FOV, better image quality.
RunCam Hybrid
Single board, simple installation.
  • 20x20mm mounting sized single mainboard.
  • Save more stack space.
  • Compatible with more frames.
Racing-level 6ms FPV latency.
The truth is, the inner FPV camera is a well-known professional racing camera - the RunCam Racer.
The latency is unbelievable 6ms. And of course, the FPV image quality is also top level.
Remote-control HD recording.
After connecting Tx & Rx to the flight controller,
you can easily start/stop recording by gently toggling the switch.
QR code parameter settings.
You can change resolution, shutter speed,
ISO and so on through the RunCam App.
Upgradeable inner FPV camera.
-What? An FPV camera can do firmware upgrading?
-Yes, it's true, you can do that through the SpeedyBee App.

Appreciate Gal Kremer for showing us how to update the FPV camera firmware in details.



  • RunCam Hybrid
    1x Camera
  • RunCam Hybrid
    1x Plastic cover
  • RunCam Hybrid
    1x 3PIN FPV silicone cable(female)
  • RunCam Hybrid
    1x Set of M2 screws
  • RunCam Hybrid


HD sensor SONY 8MP
Analog sensor SONY 1.3MP
Field of View (FOV) HD Recording FOV 145°(FPV FOV 150° @ 4: 3)
Video Resolution 4K@30fps / 2.7K@60fps / 2.7K@50fps / 1080P@120fps / 1080P@100fps / 1080P@60fps / 1080P@50fps
Video File Format MP4
TV Mode NTSC (720*480)/PAL (720*576) Switchable
Interface HD supports UART remote control; FPV(Analog) supports UART fimrware update.
Max Micro SD Card Supported Up to 128G. Samsung's U3 card is recommended (2.7K60/1080P120 requires U3 or above; other solutions require U1 or above) Please make sure that the file format of the SD card is FAT32, otherwise, it will easily cause errors.
Mounting Holes Distance 20*20mm
PCB Size 29*29mm
Lens Module Size 19*25mm
Lens Specs HD Lens : M10 FPV Lens : M8
Power Input DC 5-20V (Non-direct power supply from 4s battery or above. Powered directly with battery will generate surges and burn the camera.)
Working Current 480mA @5V / 140mA @12V
Weight 18g

Product Reviews

Write Review

  1. Almost perfect! But where is the WDR!? 4 Star Review

    Posted by on 1st Jun 2020

    I have been using Runcam splits for years and absolutely love them. The only thing preventing this split from being Perfect, is not having WDR.
    The total lack of WDR is this camera's only downfall.
    I understand that to get 4K we have to make compromises, but Runcam's WDR is the entire reason I use them over other similar products. Maybe in a future firmware update, we could get the ability to use WDR even if its just with 1080p and lower resolutions.

  2. Finally, a decent camera appeared in the FPV world ! 5 Star Review

    Posted by on 1st Dec 2019

    Having tried many different cameras at last that there was something worthy. And it's a RunCam Hybrid!!! In a very compact device we get a camera with very good recording quality and finally a very good course camera. I am very happy with this camera. The only drawback is the refusal to control the HD camera with a button on the main Board. Unfortunately not all flight controllers have at least 1 free uart. And the salvation is reading QR codes, it's great !!! Now all cameras Split d to change on Hybrid :)

  3. Finally ! It can be better... 3 Star Review

    Posted by on 9th Nov 2019

    Very good sharp in level one (to much in level 2 or 3), Dynamic range of light too small. To much green saturation. QR code systeme is very good but you can't see if the settings are good.... A 2nd vidéo line ( many FC can switch between 2 cam now like as the MATEK 722mini...) can be the next better way ! All settings in OSD with 2 video lines.