Product Name | RunCam2 4K Edition |
Image Sensor | SONY(8MP) |
Video Resolution | 4K@30fps/2.7K@60fps/2.7K@30fps/1080P@120fps/1080P@60fps |
Video File Format | MP4 |
Video saved while power-off suddenly | Supported |
Interface | Micro USB |
Serial Port | USB serial converter |
WiFi | Supported |
Max Micro SD Card Supported | Max. 128GB SAMSUNG 128GB U3 recommended (2.7K60/2.7K50/1080P120 requires U3 or above; other solutions require U1 or above) Please make sure that the file format of the SD card is exfat, otherwise, it will easily cause errors. |
Buzzer | Supported |
Microphone | Supported |
Micro-USB power input | Accepts DC 5~17V |
Battery Capacity(measured upon fully charged) | 850mAh 4.35V (replaceable battery) |
FOV(Adjustable) | Large: 155°/ Middle: 142°/ Small: 130° |
Shutter | Auto 1/30 1/50 1/60 1/100 1/120 1/240 |
MAJOR | Auto/100/200/400/800/1600/3200 |
Working current | Max 500mA@ DC 5V |
Posted by Mark on 22nd Aug 2022
Ordered this to replace an old Tactic DroneView. Wow what a difference. Great video. Long story short I had a plane go down with this camera on board, took about an hour to locate the plane and the camera was still running. So i now know the battery is good for at least an hour.
Posted by CARLOS on 22nd May 2022
Buena calidad a buen precio
Posted by Unknown on 17th Apr 2022
The filming is great and I like how when I am flying into the sun it does not black out everything
Posted by Mario on 13th Jan 2022
As good as the camera is, unfortunately the manual in this form is insufficient. You can only view the manual on your PC. If you want to print this PDF file to read it that way, this is not possible because it is readable in this format.
It would be nice if there would be a manual in PDF form, which could also be printed in a readable form.
Posted by Unknown on 16th Sep 2021
Straight out of the box the camera was a fair way out of focus, so I had to dismantle and remove the old glue from the thread on the lens to adjust the focus. Other than that, the performance is great and it works very well. I'm using a couple of Runcam 2 4k's on a full size aircraft where the small form factor is fantastic. I can mount the camera in places where I would not place larger form factor cameras. This gives me better shots with a more unique perspective.
Posted by MaBaTa on 31st Aug 2021
The video quality is very good especially at low light, but at 4K-30fps the video recordings from my drone are a bit jerky. In my case this could be easily be solved by setting to 1080p-60fps.
Posted by Martin Baillie on 20th Jun 2021
Very happy with the product and with RunCam service.
Posted by Andre Rousseau on 29th Dec 2020
I have to say the new 4K RunCam2 is worth it.
I noticed improvements on how the RunCam2 4K handled exposure, prop tearing and audio over the previous generation 1080 RunCam2.
The orange is great and the camera put up with all my crashes.
https://youtu.be/VRLft_K7S6U
Posted by Unknown on 5th Nov 2020
First I should say that this is the first piece of FPV gear I have ever worked with and that so far I have only used it through the phone app while I wait for the transmitter ad headset to arrive. I initially had trouble with the battery connection. It would not run off the battery out of the box so I thought maybe it needed a charge. It would work using the usb cable as a power feed and I got a nice image trough the app. I then found it would not charge either. It turns out the contacts on the battery were not formed well and connection to the circuit board was not being made. After a few emails to Runcam support, I put on my magnifying headset and gently bent the tiny contacts using a micro screwdriver for a better fit with the circuit board blades. All seems to work properly now.
Posted by Vince on 24th Oct 2020
It's a great little camera for what I need it for. I will be using it to mount on a HO scale flat car to video my layout. I wish I could mount it side ways it would fit better but it'll be fine the way it is. The video is great and I don't care about the audio since there's not much to hear on a layout. The control from my iPhone works for me as well.
Posted by Allan on 22nd Sep 2020
The new Runcam 2 4K is good but the control via the IOS/iphone is letting the product down. This needs to be improved to enable full operational control of the camera. It appear the android version provides this functionality and the IOS version need to be fully aligned.